Repairing Laser printer Fuser Pressure Roller with PTFE heat shrink?

[Smile]

Hello,

Some printers are still working but Fuser parts like the Pressure Roller is not available or easy to get.
I had an idea that the Pressure Roller could be repaired using PTFE heat shrink.

There are many variations available, transparent and color. Semi rigid and soft.
Aliexpress is the only option else it costs too much

1m PTFE Plastic Heat Shrink Tube Diameter 16mm ~ 40mm 200Deg.C 1.3:1 Shrinkage Ratio High Temperature 600V Translucent FEP F46
https://vi.aliexpress.com/item/1005007771672339.html

Any idea if this would actually work?

 

[Artefil]

Hello,
Great idea, actually I've one to fix coming from HP MFP M452. The pressure roller is available mainly from China, but I'm wondering how I can use these PTFE plastic tube.

Do you just put it on the tube ? Won't it slip ? Must I make the film and the pressure roller become one ?

How should I proceed : removing all the old film (a bit difficult) ? If not will it will change the pressure roller diameter, and therefore mess up line spacing a bit ?