How much effort is it worth to save my Canon Pro-10

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,792
Reaction score
8,824
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
It's not good to just let it sit around,
You’re not alone on this one, because I had terrible luck with my Pro 10, I just couldn’t get it to work for me and I ended up dumping it to save my sanity..

I was left with ink, two sets of carts and resetter and two print heads…
 

palombian

Printer Master
Joined
Feb 4, 2014
Messages
1,882
Reaction score
2,261
Points
297
Location
Belgium
Printer Model
PRO10,PRO9500II,MB5150,MG8250
It's killing me- but I rely on a printer for my business. It's not good to just let it sit around, or I might jump in at alter date.
I see.
But why not have 2 of them ? Every professional photographer has a backup camera body.
A printer takes more room of coarse, but I have both my PRO-10 and PRO-9500II one above the other on a recovered TV table.
 

MadAboutPrinters

Printing Apprentice
Joined
Aug 17, 2022
Messages
13
Reaction score
5
Points
18
Location
East Coast
Printer Model
XP-15000, canon pro-10
That's an idea I considered. My printer needs have changed from "fine art" mixed media photography prints to more commercial greeting cards, stickers, and the like.
 

ricecrispies

Newbie to Printing
Joined
Jun 25, 2018
Messages
9
Reaction score
4
Points
9
Printer Model
Canon iP7250
It's my understanding you need a PC to put printer in service mode to then rest counter. I'm willing to spend $200 on a refurbished PC laptop to use as a "service machine" for my printer.
If you only need a PC for something like that, then why not just run Windows in a virtual machine on your Mac, giving the virtual machine access to your USB ports? I would recommend the free version of VMWare for this (because VirtualBox is very frustrating to use). As for where to get Windows from, I doubt Microsoft are really going to care for such rare use if you just install Windows 10 or 11 on the virtual machine and click to say that you will provide a license key later. It will still work (although after a while you won't be able to get security updates, so I wouldn't use it for serious work with any information that you want to protect or keep private).
 

pharmacist

Printer VIP
Platinum Printer Member
Joined
May 29, 2007
Messages
2,646
Reaction score
1,411
Points
313
Location
Ghent, Belgium
Printer Model
2x SC-900, WF-7840, TS705
If your Mac is an Intel machine: install Windows natively on it with dual boot using native Windows and you are set.
 

ricecrispies

Newbie to Printing
Joined
Jun 25, 2018
Messages
9
Reaction score
4
Points
9
Printer Model
Canon iP7250
If your Mac is an Intel machine: install Windows natively on it with dual boot using native Windows and you are set.
Yes, that would work too. However, the advantages of using a virtual machine would be:
1. It takes up less disk space;
2. If you are using an unlicensed copy of Windows or an outdated version, such as Windows 7, neither of which get security updates, you won't have to worry about malicious software overwriting the contents of your Mac OS disk.
 
Top