- Joined
- Jan 18, 2010
- Messages
- 15,821
- Reaction score
- 8,851
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
One of my Dry boxes is not big enough to fit an electric silicate unit inside it, so I place a silicate bag in on top of the reel not been used at that time, and I also have a very small hydrometer in on the bottom of the box to measure the humidity.
Click to enlarge..
To dry out a used bag of silicate, I place it on the back of my CR-10 hot plate platform each time I have the printer running for a few hours or more, when I finish the print I place the now warm silicate bag inside two plastic bags for use later.. works like a Charm..
Click to enlarge..
To dry out a used bag of silicate, I place it on the back of my CR-10 hot plate platform each time I have the printer running for a few hours or more, when I finish the print I place the now warm silicate bag inside two plastic bags for use later.. works like a Charm..