- Joined
- Jan 18, 2010
- Messages
- 15,791
- Reaction score
- 8,823
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
Can you post your latest EPROM print out, after the reset…
Resetting the waste counter to a Pixma Pro 10S.
- Thread starter Manu
- Start date
- Thread starter
- #12
Manu
Getting Fingers Dirty
- Joined
- Jul 2, 2020
- Messages
- 19
- Reaction score
- 28
- Points
- 43
- Location
- Basque Country Spain
- Printer Model
- IP8750 - Pro 10S
- Joined
- Jan 18, 2010
- Messages
- 15,791
- Reaction score
- 8,823
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
Thank you for that, and now that you’ve managed to reset your printer, it may prompt others to do the same.. 
- Thread starter
- #14
Manu
Getting Fingers Dirty
- Joined
- Jul 2, 2020
- Messages
- 19
- Reaction score
- 28
- Points
- 43
- Location
- Basque Country Spain
- Printer Model
- IP8750 - Pro 10S
Hello The Hat,
in this forum I have learned a lot and I hope to continue learning.
in this forum I have learned a lot and I hope to continue learning.
Last edited:
- Thread starter
- #15
Manu
Getting Fingers Dirty
- Joined
- Jul 2, 2020
- Messages
- 19
- Reaction score
- 28
- Points
- 43
- Location
- Basque Country Spain
- Printer Model
- IP8750 - Pro 10S
Hello, 2 things,
1º The Service Tool St5204, and surely others, they will not work with the change of hardware of how the equipment was when the purchase of the application was made, and between another hardware to the HDS, if they are added or changed. Recovering the original configuration works again.
2º It is not necessary to print on paper the EEPROM, you can create a text file by clicking on ¨Data Save - Eeprom Save of the Pro page¨, as seen in the image, and then choose a name and address to the file.
Zorionak eta urte berri on.
1º The Service Tool St5204, and surely others, they will not work with the change of hardware of how the equipment was when the purchase of the application was made, and between another hardware to the HDS, if they are added or changed. Recovering the original configuration works again.
2º It is not necessary to print on paper the EEPROM, you can create a text file by clicking on ¨Data Save - Eeprom Save of the Pro page¨, as seen in the image, and then choose a name and address to the file.
Zorionak eta urte berri on.
Attachments
Last edited:
