Refiling for IP6700D

Avalon

Newbie to Printing
Joined
Nov 18, 2010
Messages
4
Reaction score
0
Points
7
I have a IP6700D with chipped individual carts. I've been trying to refill them, but quite often the printer does not read them as full any longer or go no more than half way through the ink in them and declares them empty. Does anyone now how to deal with this problem? Even though I have all this ink my printer is still completely incapacitated right now?
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,792
Reaction score
8,824
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Avalon
Try holding down the resume button for 5 long seconds and that will stop ink monitoring on that cartridge, you could do it on the remaining cartridges as well and then the problem will be solved.
Or you could buy a chip resetter which is a much safer and better option then turning off ink monitoring.. :)
 

Avalon

Newbie to Printing
Joined
Nov 18, 2010
Messages
4
Reaction score
0
Points
7
Thank you for your help, but which one you are calling the resume button? I don't see on the printer one marked that way. I guess I'll try the chip resetter If you think that's the better option.
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,792
Reaction score
8,824
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Avalon
There are usually two buttons on most Canon printers, one is the on/off button and the other one is the paper feed/resume button (its the one that flashes orange).
The resetter would be more suitable for you to use all right , just make sure you use quality inks.. :)
 

iP4XXX

Getting Fingers Dirty
Joined
Sep 12, 2009
Messages
91
Reaction score
3
Points
29
Location
West Texas, U.S.A.
Printer Model
Canon MP610, Canon iP4200
Avalon said:
Thank you for your help, but which one you are calling the resume button? I don't see on the printer one marked that way. I guess I'll try the chip resetter If you think that's the better option.
On the iP6700D, the OK button serves as the resume button.
 

ruffin

Getting Fingers Dirty
Joined
Oct 27, 2009
Messages
83
Reaction score
5
Points
36
Location
Florida, USA
Printer Model
Epson Artisan 730
Better yet, get a chip resetter from UK here:

http://www.octoink.co.uk/products/Canon-CLI%2d8%2fPGI%2d5-Redsetter-[Battery].html

Fill your cartridges and then slip them into the resetter. That will reset the chip attached to the cartridges.
Now your ink monitor will show cartridge full and function normally. See my Youtube movie here:

http://www.youtube.com/watch?v=wQssismfTIs

If you are located in U.S., Precison Colors offers resetter here:

http://cgi.ebay.com/Chip-Resetter-C...pt=BI_Toner&hash=item20b27ff10c#ht_1639wt_698

Or here if you are in Canada:

http://cgi.ebay.ca/Chip-Resetter-Ca...pt=BI_Toner&hash=item20b27ff10c#ht_1639wt_698
 

Avalon

Newbie to Printing
Joined
Nov 18, 2010
Messages
4
Reaction score
0
Points
7
Thanks guys, you've been very helpful. I already ordered the resetter. Hopefully it will work.

Cheers
 
Top