Printing on a long roll of paper 4 metres by 420mm. Continuous stationary / dot matrix / z paper

[Jackacole]

Hello,

I am wanting to print on a long roll around 4 meters (12 or so feet) by about 210mm wide (A4 width).
I intend to print "co-ordinates" on this long roll for use as a paper template. Each print is different as I am creating unique paper templates for each print.
I tried approaching continuous stationary people in companies but they could not help as each print as they needed a large quantity to make it feasible for them.

Could I print something like this on a printer such as this linked below?
https://www.ebuyer.com/452679-epson...-5S--5V2Z6OrAzAe2V0alz3EfwIkcDMRoCTNwQAvD_BwE
If not what could you recommend looking at?

Thank you,

 

[Ink stained Fingers]

you may use this software
https://www.printerknowledge.com/threads/epson-l1800-roll-printing-software.12437/

http://www.iprintctrl.com/

You would need an inkjet priner with continous ink supply - like the Epson L... or ET...series Ecotank printers

 

[Jackacole]

you may use this software
https://www.printerknowledge.com/threads/epson-l1800-roll-printing-software.12437/

http://www.iprintctrl.com/

You would need an inkjet priner with continous ink supply - like the Epson L... or ET...series Ecotank printers

Thank you for the reply, that's very helpful.

What additional things will I need aside from that software and one of those printers?

Is there a chance I could print on something thinner than what is shown in your link. https://www.printerknowledge.com/threads/epson-l1800-roll-printing-software.12437/

I am looking for ways to make this as economical and waste free as possible.

Danke,

 

[Ink stained Fingers]

I regret that I never used that software and don't have any other experience in this respect - e.g. with such print materials.