Ketil Wright
Getting Fingers Dirty
- Joined
- Oct 11, 2015
- Messages
- 25
- Reaction score
- 19
- Points
- 46
- Printer Model
- Canon Pro 1000
Hi
I have upgraded to a Canon pro 1000, and have the following Canon Pixma Pro 10 related items which I cannot use, and wish to offer them free to anyone here.
1) A nearly full set of Precision Colors Signature Edition 4 Oz inks.
2) 2 sets of PGI 72 Cartridges. I had flushed both sets thoroughly using windex and distilled water. One set I bought second hand, the other came with the printer. The former set is filled with PCSE, the latter is empty. I have all the orange covers, which I have punched a hole in for flushing.
3) A chip resetter, which has occasionally been temperamental, but has always eventually reset the chips with a bit of patience & contact cleaner.
4) Various syringes, needles and squeeze type bottles.
5) The original printhead from the pro 10.
6) various original PC inks (non signature edition) which are not enough to do even one complete refill. These I suspect belong in the trash.
A word of warning: The printer itself got sent back to Canon for repair, possibly because of damage I caused myself while flushing the carts and printheads. When I inserted the carts back in the printer, it would not see the grey cart. Canon couldn't or wouldn't fix it. I have no way of knowing whether or not inserting any of the carts or printhead into a working pro 10 would result in a similar experience to anyone else.
The ink bottles have been opened, but I think a bit of tape over the scabbards and careful packing would make it shippable to anyone interested.
Again: I don't want any $ for this. Just arrange for shipping and it's yours.
I have upgraded to a Canon pro 1000, and have the following Canon Pixma Pro 10 related items which I cannot use, and wish to offer them free to anyone here.
1) A nearly full set of Precision Colors Signature Edition 4 Oz inks.
2) 2 sets of PGI 72 Cartridges. I had flushed both sets thoroughly using windex and distilled water. One set I bought second hand, the other came with the printer. The former set is filled with PCSE, the latter is empty. I have all the orange covers, which I have punched a hole in for flushing.
3) A chip resetter, which has occasionally been temperamental, but has always eventually reset the chips with a bit of patience & contact cleaner.
4) Various syringes, needles and squeeze type bottles.
5) The original printhead from the pro 10.
6) various original PC inks (non signature edition) which are not enough to do even one complete refill. These I suspect belong in the trash.
A word of warning: The printer itself got sent back to Canon for repair, possibly because of damage I caused myself while flushing the carts and printheads. When I inserted the carts back in the printer, it would not see the grey cart. Canon couldn't or wouldn't fix it. I have no way of knowing whether or not inserting any of the carts or printhead into a working pro 10 would result in a similar experience to anyone else.
The ink bottles have been opened, but I think a bit of tape over the scabbards and careful packing would make it shippable to anyone interested.
Again: I don't want any $ for this. Just arrange for shipping and it's yours.