Hp designjet 3000cp

[Lago]

Hello friends,
I am writing to you to see if anyone can help me.

I have a hp designjet 3000cp, this equipment recovered it as damaged and it managed to work, after changing several parts, it presents the error 050000.
in solution I only find this.

https://support.hp.com/us-en/document/c00010030#AbT40

I already relize the cleaned cleaning without any changes.

Suggestions are accepted.

 

[kolvin]

Hello.
Did you ever try to change a printhead to solve this problem? I suggest so.

 

[Lago]

Hello Kolvin,

Thanks for your good suggestion.

I already solved the problem (The media sensor was dirty due to ink residues).

Now I present another problem, I can not find the cartridges that this equipment uses, if someone helps me with the compatibility of cartridges if it exists ??

Any website that sells cartridges for these teams would be useful, but I think they are obsolete.

Thanks...

 

[kolvin]

Hello Kolvin,

Thanks for your good suggestion.

I already solved the problem (The media sensor was dirty due to ink residues).

Now I present another problem, I can not find the cartridges that this equipment uses, if someone helps me with the compatibility of cartridges if it exists ??

Any website that sells cartridges for these teams would be useful, but I think they are obsolete.

Thanks...
View attachment 7917

Hello Lago


I myself is a seller about the cartridges and printheads
If you don't mind Please add me my skype to get further informations. have a nice day

Skype: XXXXXXXXX

My email: Removed by moderator..


have a nice day

 

[AlienSteve]

So... did you find supplies for this? I also have an HP 3000cp. I have a set of used dye and used pigment cartridges waiting for me to find time to clean them out and use them. It would be nice to have another supplier.

 

[Joni]

So... did you find supplies for this? I also have an HP 3000cp. I have a set of used dye and used pigment cartridges waiting for me to find time to clean them out and use them. It would be nice to have another supplier.

My name is Joni, I'm a new member, I have a designjet 3000cp printer has replaced a Service station by my self, the part number C4723-60276, but after installed, it shows "Lower window to continue" on display panel. I don't know what is wrong with my installation?
I live in California 92551, I hope that who can come to repair it? and I want to know how much the repair cost

 

[stratman]

See bottom of Page 90 of the Manual at http://h10032.www1.hp.com/ctg/Manual/bpp02403.pdf

See Page 3 for what the "Window" is. (Cover you open to replace ink cartridges)

 

[Joni]

Thank you for your help and answers,
I'm so sorry that I did not say clearly is after I installed it, no matter whether I close the window or open the window, it always shows: "Lower window to continue"

 

[stratman]

Sounds like a sensor issue. Hope one of the following links helps.

https://h30434.www3.hp.com/t5/Print...0-reads-close-window-to-continue/td-p/5581749

https://h30434.www3.hp.com/t5/Desig...ot-close-window-to-continue-quot/td-p/7337936

https://www.fixyourownprinter.com/posts/57745

 

[Joni]

Thank you once again,
I will take the time to double check the printer installation errors