How To Flush A Single Line On Epson 3880

[Ian Barber]

es. Take a look at Keith Cooper's write-up on using the Colormunki

I can create the curves ok now with the Munki but I am having issues measuring the ink separation patches as they are quite small.

Out of interest, what curves have you already created for the 3880

 

[RogerB]

I can create the curves ok now with the Munki but I am having issues measuring the ink separation patches as they are quite small.

Out of interest, what curves have you already created for the 3880

You can edit the ink separation image in PS if you need bigger patches. You do need to be careful when you edit to retain the No Color Management, but other than that it's just like any other file.The patches are really sized for the i1Pro, but people on this forum who use the Munki for ArgyllCMS seem to be able to read small patches OK. I think Emulator actually described his DIY rig to make it easier. Take a look at the ArgyllCMS thread.

I have curves for my "best" papers - Innova IFA-15 and IFA-45, and Harman Gloss Baryta. In practice you should find that one of the supplied curves should give you a good approximation to a "new" paper of a similar type. If you get close you can do a linearisation and perhaps tweak the toner strengths to get it to your liking.

 

[The Hat]

Take a look at the ArgyllCMS thread.

Would this be the thread ?...
https://www.printerknowledge.com/th...p-argyll-cms-profiling-on-your-computer.8570/

 

[RogerB]

Would this be the thread ?...
https://www.printerknowledge.com/th...p-argyll-cms-profiling-on-your-computer.8570/

Yes that's the one. I was in a bit of a hurry earlier! Look at post #20 onwards in the thread.