Epson SC-P600 paper jamming

[SureC]

I have a problem that has appeared over time. The paper is drawn down to the printer area, but then it stops (6-7 cm down). I then get an error message about paper jamming or running out of paper. Thicker paper (160 g/m2) seems to pass more easily.

 

[flyboy]

Is it possible that the rubber that feeds the paper is dirty? Maybe try cleaning it with say a Q-tip and some isopropinal alcohol. Rubbing alcohol.

In one printer of mine the roller slipped off the rod that drove it and had to be glued back on.

 

[SureC]

Thanks. Are we talking about the LD Roller on the right side? Have tried to use a damp cloth on it, but will try isopropanol. Are there other rollers active during printing?
Cheers

 

[member 17632]

I would also make sure any part during the printing process that moves [opens, closes, lifts, drops, etc] is free and clear of any debris. I had this issue before and it turned out one of the lifters where the paper slid under was jammed. That and there was a small wooden dowel piece in there also.

 

[PeterBJ]

If cleaning the rubber rollers with a moist rag is not sufficient then maybe a special rubber roller restorer might help? See this thread for info about a such product.

 

[SureC]

Thanks. I have tried some isopropanol and apparently it worked well. However, I have now ordered the roller cleaner you recommended. Is it possible that the paper (80 gr/m2) has too smooth a surface compared to what I have used in the past. Works great with thicker paper.