Epson 3880 problems

Robert Graham

Getting Fingers Dirty
Joined
May 6, 2015
Messages
26
Reaction score
10
Points
40
Location
Tucson, AZ
Printer Model
Epson 3880 Designer Edition
I have performed a successful nozzel check pattern. I then tried to perform a print head alignnment This part does not end successfully, and ends with an auto adjustment error. I have tried this several times to no success. Where can I go from here?

Bob
 

akramjef

Fan of Printing
Joined
Jul 29, 2016
Messages
72
Reaction score
50
Points
68
Printer Model
epson p50 printer
most probably it is due to contamination of the viewing sensor or eye with ink . so put a piece paper towel damped with windex or head cleaning solution underneath the print head and move the head manually ,repeat it several times until there is no more ink stain on the towel. {to unlock the print head from the station turn the printer on ,once the head free its self from the station and move to the other side turn off the main power supply ( from the wall socket )}.
hope this will solve the problem
 
Top