EcoTank and card stock

[Philip Gwyn]

Looking at the manual for the ET-2750, I see "Weight 17 lb (64 g/m2) to 24 lb (90 g/m2)" I take this to mean it can't accept card stock... which seems to me defeats the purpose of having a colour printer.

 

[Ink stained Fingers]

that's the paper spec for 'normal paper' which can be handled by the duplexer, photo paper can go up to 300 gr

'Passendes Papiergewicht 64 g/m² - 300 g/m²' Suitable paper weight as stated in the specs

 

[Philip Gwyn]

Funny how they don't include that info on epson.ca

 

[enfield250]

that's the paper spec for 'normal paper' which can be handled by the duplexer, photo paper can go up to 300 gr

'Passendes Papiergewicht 64 g/m² - 300 g/m²' Suitable paper weight as stated in the specs

I realise this thread is quite old however, I was wondering about the settings you use to print on cardstock.
cheers,

 

[Ink stained Fingers]

was wondering about the settings you use to print on cardstock.

If your paper is matte, uncoated, non-glossy I would select the matte paper in the driver.

 

[enfield250]

Thank you,
I was trying to print on some cardstock yesterday and it just ran through the printer.
Cheers,