mikem65d
Print Addict
- Joined
- Oct 2, 2014
- Messages
- 146
- Reaction score
- 176
- Points
- 167
- Printer Model
- Canon Pro-100, ip6600D, i900D
Canon CLI-42 "EU only" setup carts
- Thread starter mikem65d
- Start date
By the looks of it I would say that the production of these machines were slated for the EU during production planning forecasts last year. The EU was not able to move the quantity it had estimated as time passed and the surplus to what they actually need is being liquidated in the USA to remove the excess. This might be a rebalancing inventory action.
I'm also wondering if the EU only symbol refers to the " Do Not Dispose" symbol and really directs the user to recycle the cartridges. The EU is a lot more eco conscious in its labeling standards.
Now a far fetched idea is that Canon is saying "Do not dispose this cartridge. Refill it!" Believe that?
I'm also wondering if the EU only symbol refers to the " Do Not Dispose" symbol and really directs the user to recycle the cartridges. The EU is a lot more eco conscious in its labeling standards.
Now a far fetched idea is that Canon is saying "Do not dispose this cartridge. Refill it!" Believe that?
- Joined
- Apr 19, 2007
- Messages
- 8,706
- Reaction score
- 7,170
- Points
- 393
- Location
- USA
- Printer Model
- Canon MB5120, Pencil
Where was the printer purchased from? Makes me wonder if you purchased a "gray market" printer.
- Thread starter
- #4
mikem65d
Print Addict
- Joined
- Oct 2, 2014
- Messages
- 146
- Reaction score
- 176
- Points
- 167
- Printer Model
- Canon Pro-100, ip6600D, i900D
Bought it here in CA from a seller that received it from B&H in his 70D bundle. Barcodes missing of course.
The pro 100 and paper was listed as 75.00 on our local craigslist.
- Thread starter
- #5
mikem65d
Print Addict
- Joined
- Oct 2, 2014
- Messages
- 146
- Reaction score
- 176
- Points
- 167
- Printer Model
- Canon Pro-100, ip6600D, i900D
LOL Mike...............i'm sure by now they have realised they goofed by not inserting a recycling fee in hopes of people sending in their used carts to keep them out of our hands.
I believe you are right about the inventory balance.
I looked on ebay and found quite a few completed sales on these same carts here in the US.
I wouldn't think Canon would make a separate chip for another region.
- Joined
- Apr 19, 2007
- Messages
- 8,706
- Reaction score
- 7,170
- Points
- 393
- Location
- USA
- Printer Model
- Canon MB5120, Pencil
Yes, Canon does make region specific printer firmware/cartridge chip combinations. I just looked at Canon UK and their version of your printer is called the "Pro-100S" but does appear to use cartridges marked CLI-42. With region specific printers, Canon gives the cartridges a different numerical name. So, you might be OK.
A call to Canon sales or support should clear up this question. One thing you do not want is to buy new cartridges and not have them recognized by the printer. Another thing you do not want is to get stuck with a gray market printer that Canon will not service.
Last edited:
Canon does indeed make regionalised chips for printers but so far these are reserved for higher volume less costly smaller desktop machines. At the 13" Pro models the volume for these do not appear to warrant the overhead of separate programming at the manufacturing level for different boards/ chips etc. Same for the "setup" carts for the Pro-100 just a label instead of the regular label. When you add up the cost to block grey markets, there is a cost benefit ratio. You see similar issues for Epson as well.
- Thread starter
- #8
mikem65d
Print Addict
- Joined
- Oct 2, 2014
- Messages
- 146
- Reaction score
- 176
- Points
- 167
- Printer Model
- Canon Pro-100, ip6600D, i900D
I didn't know there was a 100S
William Seaward
Printer Guru
- Joined
- May 29, 2016
- Messages
- 208
- Reaction score
- 156
- Points
- 133
- Location
- Romeoville, IL
- Printer Model
- Canon Pro 1, 10, 100
I believe the same RedSetter is sold in the UK and the US.
- Thread starter
- #10
mikem65d
Print Addict
- Joined
- Oct 2, 2014
- Messages
- 146
- Reaction score
- 176
- Points
- 167
- Printer Model
- Canon Pro-100, ip6600D, i900D
Canon says no worries............like Mike said, recycling is stricter in Europe.
I also received a few CLI-42 carts from ebay with same logo.
Put one in the printer and it blinked as an empty does and showed the big red X. Did the reset and it then showed full.
I did not dare run a print with it, but i thought once the reservoir was empty that it caused a blinky light anyways regardless.
At least i got my answer and can now go back to sleeping properly
I also received a few CLI-42 carts from ebay with same logo.
Put one in the printer and it blinked as an empty does and showed the big red X. Did the reset and it then showed full.
I did not dare run a print with it, but i thought once the reservoir was empty that it caused a blinky light anyways regardless.
At least i got my answer and can now go back to sleeping properly
