- Joined
- May 29, 2007
- Messages
- 2,667
- Reaction score
- 1,437
- Points
- 313
- Location
- Ghent, Belgium
- Printer Model
- SC-900 ET-8550 WF-7840 TS705
For those interested here is a patch set for profiling printable PVC ID cards that can be printed on by several printers (Canon, Epson) using a special PVC ID card tray.
In most cases the standard setting will give a strong colour cast and with this target set (be be printed on the front and back side of 2 PVC ID blank cards) will neutralise the colour cast and gives much more accurate colours.
The scanning should be done slowly and carefully. With the small patches it takes some precautions to get a good reading, but it can be done.
Use with ArgyllCMS and i1Pro2 spectrophotometer.
In most cases the standard setting will give a strong colour cast and with this target set (be be printed on the front and back side of 2 PVC ID blank cards) will neutralise the colour cast and gives much more accurate colours.
The scanning should be done slowly and carefully. With the small patches it takes some precautions to get a good reading, but it can be done.
Use with ArgyllCMS and i1Pro2 spectrophotometer.
