- Thread starter
- #11
- Joined
- Jan 18, 2010
- Messages
- 15,792
- Reaction score
- 8,824
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
Here's an update on my Ender 2 hot-plate platform upgrade...
After getting everything lined up and sitting in the right position, I then decide to reprint the plates seen in photo 2 and 4 (Post #3) as one piece and do away with the need for nuts and bolts.
Pic 3. 
Pic4.
My concept of having springs on the 4 corners supporting the hot-bed worked and now the bed is completely stable and semi ridged, just the way I planned it.
click to enlarge.
The Ender-2 is working nicely with the new upgrade installed and couldn’t be working any better, I reckon this was one of my brighter ideas..
After getting everything lined up and sitting in the right position, I then decide to reprint the plates seen in photo 2 and 4 (Post #3) as one piece and do away with the need for nuts and bolts.
Pic 3. Pic4.My concept of having springs on the 4 corners supporting the hot-bed worked and now the bed is completely stable and semi ridged, just the way I planned it.
click to enlarge.The Ender-2 is working nicely with the new upgrade installed and couldn’t be working any better, I reckon this was one of my brighter ideas..
