FryingSaucer
Printer Master
- Joined
- Mar 8, 2010
- Messages
- 206
- Reaction score
- 153
- Points
- 203
- Location
- UK
- Printer Model
- Canon MX725,MB5150. 3D:Anet A8
I have had an ip4600 for 9 months, and have been using Inkrite compatibles. Recently the magenta cartridge has stopped printing. I've run deep cleaning and replaced the cartridge with a new one, with no improvement.
Should I try cleaning the printhead next, or what?
I'm based in the UK and am unsure what to use for cleaning as Windex is not available here. Can anyone in the UK suggest what to use?
Also (a really basic question) is there one printhead for each cartridge or only one for all of them? I don't print much colour, the printer works OK on greyscale, and I'd feel more comfortable if damaging the printhead only affected printing in magenta.
The nozzle check I ran is below. Thanks for any help anyone can give me.
Should I try cleaning the printhead next, or what?
I'm based in the UK and am unsure what to use for cleaning as Windex is not available here. Can anyone in the UK suggest what to use?
Also (a really basic question) is there one printhead for each cartridge or only one for all of them? I don't print much colour, the printer works OK on greyscale, and I'd feel more comfortable if damaging the printhead only affected printing in magenta.
The nozzle check I ran is below. Thanks for any help anyone can give me.