megalithic
Print Lurker
- Joined
- Sep 16, 2023
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Printer Model
- HP Business Inkjet 2800
Hello,
I've got an HP Business Inkjet 2800 that I've not used in about a year.
It all seems to work with the heads going back and forth etc but there is no print output at all.
No errors.
I've run Clean Heads many times, still nothing. I've cleaned around the openings the best I can with a damp wipe.
I was going to buy one of these print head cleaning kits with solution and a syringe as advertised on eBay but they all say "not suitable for printers where the ink connects to the heads via a pipe", which is the case here.
This printer has 4x separate ink cartridges and 4x separate removable printheads, connected via a pipe as mentioned. I have a couple of spare printheads I've swapped with also.
Any suggestions / hope for unblocking / cleaning?
Many thanks
Andy
I've got an HP Business Inkjet 2800 that I've not used in about a year.
It all seems to work with the heads going back and forth etc but there is no print output at all.
No errors.
I've run Clean Heads many times, still nothing. I've cleaned around the openings the best I can with a damp wipe.
I was going to buy one of these print head cleaning kits with solution and a syringe as advertised on eBay but they all say "not suitable for printers where the ink connects to the heads via a pipe", which is the case here.
This printer has 4x separate ink cartridges and 4x separate removable printheads, connected via a pipe as mentioned. I have a couple of spare printheads I've swapped with also.
Any suggestions / hope for unblocking / cleaning?
Many thanks
Andy
Last edited:
