Search results

  1. S

    How to remove PRO-1 printhead ?

    Now I am getting 5c20 error. Seems like I am not going to print any more with this machine.
  2. S

    How to remove PRO-1 printhead ?

    Damn it!! Mr @The Hat , do you remember I wrote about that plastic lever like thing with a spring? I looked at it again and saw, that in front of it there is a plastic post, like a stalactite. I took a pin and "feeled" it, poked it a little. I sensed that it was crook-shaped on its end. Then I...
  3. S

    How to remove PRO-1 printhead ?

    Holding Resume btn does not help. The paper feed roller moves freely. The cartridges' bodies are OEM, but the chips are chinese and the ink is as well.
  4. S

    How to remove PRO-1 printhead ?

    The new print head is installed, but the 1300 error persists.
  5. S

    How to remove PRO-1 printhead ?

    I replaced the empty cartridges using that post. The printer shows them as before - almost empty. OK. let it be that way. Today I am goint to install the new print head and see what will happen. My expectations - 1. The printer will show some horrible error and I will throw it away, sell the...
  6. S

    Canon Pro 1: Paper Jam / How to open the printer

    Ok. I already feel that I am asking too many silly questions here.:duc
  7. S

    Canon Pro 1: Paper Jam / How to open the printer

    Got it... but should the spring "dangle"? I took a look at it again - one end is attached, but the other is not..
  8. S

    Canon Pro 1: Paper Jam / How to open the printer

    I have a question regarding paper sensors and the Canon 1300 error on Pixma Pro-1. The attached picture shows a plastic device with a spring, that I can see under the print paper path in the center of it. There is a square hole there. My question is. How does that hole look like on a healthy...
  9. S

    How to remove PRO-1 printhead ?

    @The Hat , so is it possible to replace cartridges without switching the printer on? Actually it is possible, as people get rid of the error, when Pro-1 locks the cartridge compartmets' doors. There was some thread here.
  10. S

    How to remove PRO-1 printhead ?

    @The Hat. I do understand that. But before going that way I want to make shure it is not a dirty sensor, that triggers that error. And gray ink cartridges are almost empty. If I replace the PH the "brute force" way, how will the printer react to empty carts? The engineers are not fools, of...
  11. S

    Bulk ink to Canon imageprograf IPF 670/680/685/770/780/785

    It is of no use knowing the price in Russia. The ink is made by an american company. Or so they say on the web. Compared to average chinese inks STS is about three times more expensive.
  12. S

    How to remove PRO-1 printhead ?

    The damned error persists. I cleaned the interior of the printer (without disassembling any of it). Tried to clean the bottom of the carriage a little. Pushed a few sheets of paper throug. How does it sence a jam? Is the sensor installed on the carriage or somewhere else? I cannot change...
  13. S

    Bulk ink to Canon imageprograf IPF 670/680/685/770/780/785

    They do sell bottles with ink 250 and 1000 ml marked STS inks in Russia, but the official site has only cartridges...
  14. S

    Canon Pro 1: Paper Jam / How to open the printer

    How did you resolve the issue? I am getting the same error in almost the same situation. I had an ink spillage from the print head and after that the 1300 error persists. May be someone has a scheme with paper sensors disposition?
  15. S

    Bulk ink to Canon imageprograf IPF 670/680/685/770/780/785

    I know people who use STS inks in my country and they say they are quite good. They match Lucia, Lucia pro, Lucia ex. The second choice is Hongsam inks - china. I haven't heard about OCP's inks for prografs, but if you don't use it for photo printing and you only have 4 colors, you might try...
  16. S

    How to remove PRO-1 printhead ?

    So, I am ready to install the new print head. I turned the printer on - with the old leaking print head - to check whether I have enough ink supply in the cartridges. Almost immediately after startup the printer showed the 1300 error (paper jam), but there is no paper in the tray, not even...
  17. S

    How to remove PRO-1 printhead ?

    Private Message. Also used as a verb "to PM someone", thanks to the wonderful way of word formation - zero derivation, or conversion, which is possible in the English language because of it's analytic nature.
  18. S

    How to remove PRO-1 printhead ?

    My new printhead is on it's way from France :) It is currently clearing the customs. I hope it gets to me safe and sound, and I will be able to use that successful formula "Patience + The Hat = Success".
  19. S

    canon pro-100 sale again, maybe 49.00?

    I wish we had same discounts in my country. We've got nuclear missiles, robotic submarines, best rocket engines... but no good cheap printers. Bummer.
  20. S

    Oh, sorry, did not see the post with the price.

    Oh, sorry, did not see the post with the price.
Top