Search results

:oops::oops:Why!!!! I could have shared mine that is virusfree and works perfectly!! If your printer had just the Waste ink problem you trashed an amazing printer !!! Mine works perfectly after 10 years!

I have almost the same printer (Artisan 835 Stylus Photo PX820FWD), and I went through all these problems, and about what I read and what was my experience these printer head hardly clog for real, most of the time the problem is airclog, -If you want to try to save the printer (I did and I'm...

Hello, I own an Epson Stylus Photo PX820FWD ak Artisan 835, and as happened to other people, as I learn serching, I have a problem with a gear on the ADF scanner feeder motor that is cracked that seems caused by a design's flaw since the replacement that were sold for this piece had the gear...

I have the same printer and the waste ink pad reset tool, I don't know if I can share it here, if some moderatore tells me I can I will

Plus I have to add that even if my printer was really neglected in the past years (left for months partially airclogged) it stil works flawlessly and has no problem at all once the printer head is perfectly primed and can handle different non OEM inks even the ones that came from cheap...

Thanks, exactly what I was thinking "If ain't broken don't fix it"

Hello, just checking on the Epson website I discovered that there is a recent firmware upgrade for my printer ( nov 2020), but I'm currently using ARC refillable cartridge. Does anyone has experience upgrading firmware while using compatibile / refillable ARC / CISS cartridge ? Could it be...

Hello, as already said on other thread I own an Epson Stylus Photo PX820FWD aka Artisan 835, and today I want to talk about the bad experience I had using compatible cartridges and how switching to refillable cartridges fixed my problem (I think at least until now), definitively I bought the...

Thank you, the only thing I'm a bit concerned about the SquEasyFill system is the needle because I see some review on youtube that don't recommend to insert the needle into the cartridge because it could accidentally damage the thin plastic layer on the cartridges insides walls ,plus these caps...

Something similar, I was looking for cap similar to SquEazyfill but I discovered that the syringe tip fit perfectly in the refillable cartridge hole so I will go for these kind of cap that seems more easy to get thanks Anyway this bottle is DIN 25 standard, I asked OCP, so it will be even more...

Thanks for you answer, but I think that my cartridge are of the second kind since when I remove and reinstall them the system read always the same ink level anyway attached to this message a picture of the chip installed on my cartridges

Ok I can confirm, tomorrow morning I found another cartridge, the Cyan, resetted to 100% by itself, I didn't do anything,

Hello everyone, recently I bought from OCP in Germany the inks for my printer Epson Stylus Photo PX820FWD aka Artisan 835, 250ml each color (BK Y C M LC LM ) Those inks came each with a 250ml square bottle and with just a cap, I was trying to identify the cap standard and check if there some...

Update: I recently switched to an ARC cartridge set and I primed the printer head, that was airclogged on the black and the LM from the previous compatible cartridges, performing 3 printer head cleaning; now I think that I fixed my problem since it occurred often when I had to replace compatible...

No I'm using just a a single ARC cartridges set, the only one that I own, to replace the compatible cartridge that I was using till yesterday that gave me airclog problem each time I had to replace them (they were probably poorly primed ) The fact is that some of these ARC refillable cartridge...

Hello, I just installed on my Epson Stylus Photo PX820FWD a set of refillable cartridge with auto reset chip, I always taught that the auto reset chip will autoreset automatically once the printer says that the cartridge is empty/doesn't recognize it anymore and you remove it from the printer...

If I had to prime just one color since there's air in that tube (other colors just print fines) what do you suggest? I would avoid to disassemble the printhead again, even depressurizing it first, it's a bit a mess

Hello, my Epson PX820FWD aka Artisan 835, has one of the color (LM) that suddenly isn't printing anymore and I'm 100% it's a matter of air in the supply tubes, the other colors just print perfectly, So since I already fixed this disassembling the print head, but is a real mess, and since it's...

I think then that your video tutorial needs just to be updated since the first operation before disassembling and priming the tubes should be decompressing them As you can see I have the Adjustment Epson program for my Epson Stylus Photo 1.0.0, Do you know which version is the latest and...

Ok thanks for the updated, indeed I followed that video to prime again the cartridge, plus the tubes were kind of pressurized and luckily there were not too much ink inside them, since they were full of air, and seems that nothing went into the electronics, at least until now the printer is...