Search results

Is it not possible to replace (open/close) the ink absorber of a Canon Ts 5055 or is there no counter reset sotware?

Pls. tell if anyone have had success!

Still no luck. Used three sets of ink cleaning the printhead.

I have no TS3150, but a IP7250, a TS705 and a TS9150 and have tried refilling all of them. IMO: Do not even try!. Apart from the work, you will have problems with getting the right colors in pictures. I do pictures on TS9150 and TS705 with OEM ink (expencive, but works), I do unimportant color...

I'm currently applying this method - with very little luck and heavy ink use (for nozzle check). Maybe I just have to be patient? As I could not easyly buy the liquids I bought a cleaning kit from JETlitetech specially for Epson ink. (I needed the tubeing and fittings)-

Have anyone had a possitive way to unclog the printhead of a XP-402 while the printhead was installed? What method was used?

I recommend to do a 'Print head alignment' after fitting the new print head.

Please notice. BK is only used for picture printing and only for sharpening edges. You can do color printing in ok quality with the fault. There is one very good reason to do so: cheap ink. Try to see if you can find any significant difference in your print-outs. Don't waste money on...

On my second IP7250 print head (no magenta) I tried to open the head (no way). Then I tried to press water through the blue inlet, and the yellow inlet and here the water is running through nicely. Question: What can use to clean the magenta inlet? If liquid for how long and what is the active...

In order to prevent clogging magenta I cleaned the print head with water (tube and syringe) and installed a new Canon cartridge. Did some test runs and replaced the Canon cartridge with at non OEM cartridge (7eur/cart). For two weeks no clogging. In the proces I have a second head with allmost...

I've seen that too and The Hat claimes it is due to poor ink. I agree (problem gone with OEM ink). This problem is a blocking in the print head itself from the inlet and out. Normally I can press cleaning liquid (or water) through with a tube and a syringe, but not anymore. As I see it there...

I'm presently trying two danish suppliers of ink. No blocking after two weeks. On an other print head for the IP7250 I have a blocking I'm not able to open/remove. I have tried cleaning liquid, water and soaking for a week. I still not able to press liquid through the inlet of magenta...

I tried to have a look, but my french and dutch is very poor. There are no english on the site. Also I noticed something about Corona, but could not understand and txt could not be copied.

It seems your statement 'Poor ink' is correct. The head is now running with OEM magenta. I tried to register at 123ink.ie, but no luck. I need some help in finding a cheap non OEM ink (refill?) (3-5 EUR). I'm presently testing ink from danish suppliers (Nordic-ink and Printerrefill)

Do I understand you correctly - the problem does not exist with OEM ink? Do you have a suggestion for quality ink supplier (cheaper than OEM, 17 EUR)? I've tried two different danish suppliers (china ink).

Case update. During normal printing (plain paper, non OEM ink) magenta stops (cartridge NOT empty). Cleaning cycle, cleaning with formula ( 2 times 12 h) and then cleaning cycle. Nozzle check after cleaning. One more cleaning cycle (spots in magenta). Nozzle check after cleaning. Next...

Which situation do you want? 1. check or 2. check or?

Hard to say. I bought this https://www.nordic-ink.dk/rensevske-canon-printerhoveder-p-799.html?osCsid=d3vgbfudkk7kg395fr3agqjen3 They do also sell printheads for IP7250

I've now tried a bought cleaner for printhead with poor result. My printer (IP7250) keeps missing magenta in the print. After a deep clean the nozzle check showns magenta with one or two short lines. In the next nozzle check magenta is missing 100%. Can anyone think of a reason? Presently I...