Search results

Sorry for the delayed response. A million thanks to The Hat :bow Thru a few messages and suggestions/observations he cleared thing up for me. Long story short, apparently, just apparently, (since there is no other explanation), I must of drew ink for the Photo dye bottle instead of the...

It apparently isn't that. It appears to be the ink from Ink Owl from 10/20. The bottled is labeled "Pigment Black" which I have been using for some time. The 'carts are newly nflushed form one of you guys a number of years ago when I was having issues with printbheads which turned out to be old...

ip 4300 After probably almost 20 years a may be 3 printers, I'm still refilling. I'd rather fight than switch! Hell with those chip swaps and all the other tricks Canon has come up with. ! :mad: :p

I just swapped my black cart which was low in a ip4300 with a refilled cart (one tank in the printer, the other refilled ready to go). When I used a 'highlighter' the black print smeared terrible which NEVER happened before using Cannon printers (probably over 15 years worth) I wonder if I mixed...

A organization I'm a member of received a couple of older printers. One is these is HP. I had to do some initial research since I haven't owned a HP for almost 20 years or so. I realize it's a older printer, but it was donated. I have already told them figure the Printhead and the carts will...

This model came out around 2007. I do have a 2nd copier/printer, but the document feeder doesn't pull paper in properly. I just never opened it up to clean the rollers since it isn't easy to do so. Opening the main unit is even worse. I do have the Service Manual, one thing I do make it a point...

Ok, you are talking about the Drum unit, NOT the cartridge that holds just the toner. The wiper blade and toner drum itself, unless that machine has a entirety different design.

"cartridge" or drum? The cartridge only holds the toner that empties it into the 'hopper' of the drum. Assuming you meant the 'drum', I just proved it was the toner since the prints are 95%+ good. I tossed the over 18 month old toner, it's not worth destroying a $130 drum unit that is almost...

I forgot I had a original Panny toner cart. So I decided to clean out the drum again, hoping it was the toner, not the drum unit itself. It worked, the prints seem fine except for a faint residue on the far left of the page which you have to look closely for. When I tried to message AAA Toner...

I did some test prints and they are far better, but there is still a residue that gets worse towards the left side. The text itself seems mostly ok. The page count on the copier is 3200. The count of the new drum itself is 1800 so I can't see it being a high count issue. One thing I forgot to...

I did open up the drum unit and cleaned it out including what appeared to be the 'blade' which didn't seem dirty. I haven't tried printing yet. I did empty and clean out the reservoir area in the drum thou. I haven't printed yet.

There was little toner left in the cartridge. The cartridge opens up when you insert into the the drum unit emptying out it's content. The toner is all in the drum, not in the cartridge other than the coating on the inside of the container itself. I've never had any other Laser printer other...

I have a older Panny laser copier/printer/scanner (MB-271). The drum is fairly new. I don't print often. The cartridge ran out, I refilled it with toner that I bought 5/22. Is that considered too old? The printer was printing fine. Now after filling it prints dark on one side, and gray on the...

I should add, this is not the deal with that MS KB update causing a similar problem. That update was never installed.

Out of the blue (well almost) the Scanner function has stop working. The machine goes thru the cycle of scanning, but no file is produced. I've never had a problem with this on more than one of theses printers. Here is what I have done; Did a search, but nothing other than a bad MS KB update...

Convinced! I bought 4 completely refurbished sets.

"Used ink" as in ink that was already in a cart that was refilled?

Other than a "fungal infection", any thing else affect the ink as far as actual longevity and print quality?

Here it is;

As in this one specifically; https://www.ebay.com/itm/303569881545?hash=item46ae2cc9c9:g:tZkAAOSwZbJewMJZ What a write up. I specifically noted the comment about Precision Colors disco'ing their empty carts. :eek: