Search results

Ok i will reprint the target again, then i will read them again, i updated ArgyllCMS to the latest version, maybe i would have left it to the old version :)

could it a low patches profile that gives these results ?

Thanks for the info. Can you compare my icc profiles and give some feedback ?

Hi all, i got about 750+ sheets of A3+ old paper for 70 euros, it goes from Canvas, Fine Art, Glossy, Semigloss, Photo Quality, Matte, from Canson, Ilford, Epson, Canon, HP and other unknown brands. For some of them i got the paper manufacter profiles for my Epson XP 15000 (but i think maybe i...

yep i will use the suggested trick by Ink stained Fingers, to use a sheet of 100 patches printed with several Epson paper like media type (Premium Glossy, Matte, Semigloss) and if i have enough lucky on the same A4 sheet, then compare the profiles to see which one have the darkest black, when i...

Yes, usually i leave it dry for 24 hours, then read the sheet of patches to make the profile

thanks i had read that article, but my question was more general, is it better use a conditional Epson profile, to create a new set of patches or is it better use a set of patches from zero ? Another question i have a Ferrania Optijet Matte High Resolution Paper 120gsm and I created a profile...

Thanks i used the trick to wet two fingers and then keep tight the paper on an angle with them, wait 2 seconds and then try to open the fingers, only one of them will keep the paper from going to the floor, that will be the right side where to print on

I use Argylcms and the i1pro to make profiles. My question is - Using a precondition ICC with ArgyllCms (using for example the ICC for the Epson Premium Glossy Paper if the paper is a glossy paper) and generating a new set of patches based on that ICC will give better results then -...

Hi all, i know it seems a stupid question, but i got a stock of A3 and A3+ (600 sheets for 70 euros) of photographic paper, Olmec, Canson, HP, Epson, some Matte, Cotton, Canvas without name, and so on. My printer is an Epson XP 15.000 and for all the paper i could download a profile i did it...

Strange my Epson XP 15000 Horizontal alignment page is in cyan (like your first page) I don't have a second page like your second image, i have only 7 patterns and it is not so easy understand the best one, you have to pay attention to the pattern, the bars are all closed together, some less...

Talking about borderless printing: in my epson xp 15000 if i use borderless print, i can only choose expansion min, med or max, but there is no option for no expansion, how do you print test patterns for profiling papers ? usually i choose normal A4 paper but in this way it is in someway resized...

ok, so 106 and 114 are very similar, but the question now is: When i use Original OEM inks 378XL and 478XL, these are the original inks for the XP 15000, i can print directly on Epson paper using the ICC profiles in the driver if included If i change the Original OEM inks with 106 or 114 inks...

Now my thought are, maybe is better to get all 114 inks get the Red mixing Magenta and Yellow so we have all Epson Inks with the same "Fade resistance" ?

Ok it's the same i have found, how many waste tanks you have bought ? Or you just reset the first one ? And for how many times ?

Do you have a link for the waste tank resetter ? I saw tank resetter for 30$, with 5$ i can take 1 waste tank, so 6 waste tank before reaching the tank resetter, is that so inexpensive ? I know that a tank can be reused at least 5-6 times, but how much often a waste tank is filled ? How many A4...

Hi all, with my XP 15000 (European model), i'm refilling original cartridges (resetting them with an Aliexpress resetter), and i'm refilling them with Epson 106 for Black, Yellow, Magenta and Cyan, for Red and Grey i'm using the Epson 478XL original cartridges (i got an offer and taken 4 of...

Hi all, i too have the epson xp 15000 european model, with resetter and i use original Epson cartridges for now i'm refilling only the Black, Cyan, Magenta and Yellow with Epson 106 inks (they would be the same Claria HD of the epson original 378XL inks for the xp 15000), now my questions are...

thanks for your answer, so 256 would be the max for the Grey (-g) to be used for creating a pattern chart. what about White (-e) and Black (-b) options ? 8 are enough for 256 greys ?

21 enough for a b/w photo print ? but how accurate in reproducing b/w "colors" ? i don't talk about a normal B/W print, i talk about a selling print or an archive print, something you want to see in the future that has the "perfect" rendition (good transition in greys and blacks). I know that...