Search results

I'm confused, isoproponal not good, water not good. What's left to use? Is de-ionised water safe as you dont seem to see distilled anymore? With the last yellow print blockage i did notice some wispy looking strands in the cart reservoir and it had only ever had Octoink dye based in it and never...

Regarding filling auto re-set carts with Octoinkjet dye based ink. Do i need to flush out the carts before re-filling and if so with what. I have used isopropanol for head cleaning before but that seems to have become very expensive since the last time I bought it. The carts have only ever had...

Regarding the scan, i scanned the zipped file then unpacked it and scanned the resulting 2 files and finally scanned the whole pc after using the tool. Result was no threats detected. I don't know what else i could do, Kaspersky seems to have a fair detection rate and rating apart from the...

I bought this printer last year after my mg5250 gave up, i've just replaced the printhead on this one after a very short time just under a year according to the readout. The yellow refused to print, couldn't clear it despite repeated cleaning in isopropanol. It was cheaper to replace the...

https://link-4share.com/download/VYqMay7oba/canon_service_tool_st_v4720_-_g1000%2C_g2000%2C_g3000_reset_free_zip.html The above link will take you to v4720 dowload page, click on get link and enter "captcha" nos and download file. It's a zipped file and i extracted it using 7-zip software. I...

The service tool v4720 does work, i was looking for a change in absorber value when reloading the tool. I now realise you have to print out the eprom to see the change has actually taken place. I believe tool v3200 is also ok for canon ip7250.

took a risk cos i have macrium reflect to restore my hard disk, ran v4720 got in to service mode set absorber lever and set ok. exited service mode and tool then re-entered service mode and tool again and absorber level was back to 0. it seems that it always returns to absorber 0 reading even...

Strange v3200 seems to function perfectly by setting the absorber value, but when i close the tool come out of service mode then re-start service mode and sevice tool the absorber count says 0 which it seems to be stuck on even after succesfully changing it to a higher test value and reloading...

Strange just tried v3200 Windows 10 (ip7250) again printed out all pages test eprom etc. left the region on Jpn and managed to alter absorber counter and set it ok! Last time i changed region to eur, leaving it on jpn seems to have made a difference,. service tool v3200 functions perfectly now!

Hi Peter, when i used service tool v3200 on my ip7250 i could print out the 1st page of test print and also alter absorb waste ink Nos but not set.(error 009} Regarding your link to v4720 , Chrome wont allow me to download it saying it's dangerous file. Pausing my Kaspersky security makes no...

Ouch i rejoiced too soon , gets you into service mode but wont set/save, you get error 009 I have several service tool versions and all give error 009 when you set/save.

At last found a sequence that works. Pixma IP 7250 service mode After entering service mode use service tool V3200 Turn off the device. Press and hold the Resume button. Press and hold the power button. Release the resume button and press it briefly 5 times. The orange LED on the...

If you look at the panel posted by PeterBJ you will see the fully lit panel, this only appears briefly on startup. The only one that remains lit is the power button nos1.When trying to enter sevice mode you have to holddown button 7 which you cant see and then hold down button1 as well. Then...

Been trying for ages to enter service mode with the pixma mg7550, tried all available tools including v3600 and every button combination i can think of. Nothing works all though i think ive entered service mode as buttons are active but always return an error 006. A lot of sequences refer to...

Well it seems the Canon Pixma MG7550 has stumped everybody. So far nobody has responded saying they have this printer and have succesfully entered sercvice mode supplying service tool version and procedure used.

I've tried every which way i can with v3400 and it doesnt work with the canon mg7550. There are no physical buttons on this printer, i dont think the tool is compatible to this printer as the paper selection rear tray? is completely irrelevant as there are only 2 cassette choices on this model...

I have found that if you are not in service mode the tool buttons are greyed out and not responsive when using the mg5250. It appears to be the same with the mg7550, greyed out buttons when not in service mode. The fact that the buttons are active and respond indicates in service mode. I run the...

Well ive tried every combination with v3200/v3400 and some sequences get me into the reset tool and allow use of tool button selection. But no luck with printing out eprom or resetting waste ink, just keep getting either of the afore mentioned error numbers!

the mg7550 has no physical buttons only touch sensor. ive tried using the the stop cancel sequnce with service tool v3200 and v3400 i seem to get into the reset page ok with all options apparently clickable and when i click on print eprom i get the paper postion tray pop up ok. i select rear or...

Canon service manual required for Canon pixma mg7550, anybody got a link for a download on this printer?