Search results

I got a say THANX!! for your interest in this subject. I agree with you and have ordered a new resetter from Precision Colors and this should solve the problem. However I like to mess around with this kind of stuff as it helps me learn about basic basic electronics so I plan on wiring in a...

So I have two of these resetters. Inkjetcarts.com gave me a second one when I complained the chips were blowing. I have now checked out both and the voltages are same on both. Is there an easy way I could convert these to battery operated by removing the usb plug and then soldering on two...

I got 3.63V at C2. Is that to much? Being honest here I really don't know what IM doing here just following your instructions.

Checked voltage with 3 different meters got 5.06 5,07 5.08 Not sure if I uploaded this pic the right way Took hi def pic and redueced size to 29x35 cm and the changed to 200 pix/inch When plugged in and the button is depressed I get a about 7 or 8 green flashes and than a constant...

Lost magenta, cyan, and pgi 225s black So far aok with cli 226 black and yellow. this is an all white USB resetter sold by inkjetcarts.com They told me I needed the usb version to reset their chips as well as OEM chips. It is plugged into usb port on front of my desktop pc. I thought...

I’m having trouble resetting the chips on my pgi 225 and cli 226 carts for my MX 892 printer. I’m using a USB resetter purchased from inkjetcarts.com. I also purchased their resettable chips so I might change over all the carts I have left from my old printer (MX860) pgi 220 & cli 221. The USB...

German method for me now over 2 years. I also fill for two other people who do a ton of printing. I fill with squeeze bottles with sharp needles. In the beginning I tried to squeeze to fast and had a couple of accidents. Had to pace myself when I was filling more than 5 sets at a time I get...

Anyone here know to print with edible inks. Does this take a special type of printer. Interested in printing on icing for cakes. Is there a special paper to print on and then do a transfer to the icing. Ive seena lot of nice work lately in the stores and was wondering if it was possible...

Both methods are being used by a lot of people with success. Both have their problems but can be worked around. Ive been refilling through the side hole (referred to as the German method) a few years now with a lot of success and hardly any problems. What you have to watch is that when you...

I think you guys are right. Ive had this thing (the print head) apart a couple of times now and I still get the same thing. The nozzle checks are terrible as far as the PGBK goes. The colors are ok to fair. I can print usually one page and then it starts to deteriorate. I guess I need a new...

Hey Hat, I forgot to say that I only pulled the paper out in the same direction it was supposed to feed. Never thought about tearing it off short so there would be less to pull thru. I thank you guys again.:)

Well both u guys were right. I needed to run an alignment. This went really well and now it seems to be working fine. No noises because I cleaned and lubed print cart bar and now that I aligned the printer Im getting straight lines both vertical and Horizontal. I totaly forgot about the...

Well right again ---- I cleaned up the bar and put a little lite oil on a tissue rubbed on the bar on both sides of the cart holder. Turned the printer back on and it does sound a lot better with no error messages. So I printed the spreadsheet again but sorry to say I got the same results wavy...

Ok now Im starting to understand how this thing works. Thank you PeterBJ and Turbguy. After hearing this and looking at the whole thing I believe the seals serve a dual purpose both for the vacuum and to keep things from drying out. Once the ink is sprayed out of the head, - that starts a...

Well I tried the purged cart and got almost the same results. I first printed a half page with it and it looked AOK So I did a nozzle check and found only 3 lines that were missing on PGBK. so thinking maybe I was going to be ok I decided to try and print several pages of the spread sheet...

AHHH I was cleaning the tractor belt that moves the cart. holders. I now see the clear timing strip and have cleaned with ammonia windex. Tried again and still the same problem. The cart holder runs back and forth and makes some strange noises and then comes up with the error msg ------...

You are right. I am printing in landscape so it is the vertical lines that are all wavy. I cleaned the belt (1/4" wide tan or brown) is this the right one??? It had a lot of ink on it and took several wipes to get it clean. I did this by holding the tissue against it while I worked the...

I am really mystified here. Seems most everybody says I need to purge a PGBK cart so that it can feed ink to the outlet sponge. I tried 5 more refilled carts tonite all with the same result. I tapped each cart on my bench with the orange cover in place. Then I also tapped several times on the...

mx 860 Printer was printing spread sheets which were in black and white quite good. Then I noticed I was low on both black inks. So I replaced the whole set of carts with refilled ones. Now I have replaced carts several times and I keep getting the same streaky printing. I ve cleaned the...

My HP psc 1600 is printing all horizontal lines and data on a spread sheet in a wavy pattern. What can I do???:(