- Joined
- Jan 18, 2010
- Messages
- 15,791
- Reaction score
- 8,824
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
I finished making all the new pieces I reckon I needed last night, but not without a few problems, I got my first clog in the new machine, and no idea where it came from, I was 22 hours into the part when the nozzle stopped feeding filament.
It might have been a bad section of filament or something, the humidity was @60% for the fast few days so I maybe it caught up to me and the filament started to foam, who knows..
When I went to remove the tubing from the glass it refused to budge, and when I finally got the Feckin thing off, it pulled some of the laminated covering from the glass surface, see Pic, then I decided to replace the clogged nozzle with a new 0.5 one and then continued to print the remaining missing piece… More later..
click to enlarge
It might have been a bad section of filament or something, the humidity was @60% for the fast few days so I maybe it caught up to me and the filament started to foam, who knows..
When I went to remove the tubing from the glass it refused to budge, and when I finally got the Feckin thing off, it pulled some of the laminated covering from the glass surface, see Pic, then I decided to replace the clogged nozzle with a new 0.5 one and then continued to print the remaining missing piece… More later..
click to enlarge
