pharmacist's latest activity

This is the current model

I will give it another test tomorrow, very strange indeed and wil double check again

Here is the profile without Black Enhance Overcoat....strangely enough there is no much difference at all..... The version with BEO is...

The profiles are very much identical; what printer, paper and inks were used to print the patch sheet ? The black point is pretty much...

The printer is the Epson SC-P900, using Inktec Powerchrome K3 ink (original Epson PB and Violet), paper: Netbit Glossy 300 gsm (Aldi)...

Thanks to The Hat who provided my this special 3D printed scanning jig for the Colormunki/i1Studio Photo I could do an interesting...

Thanks also goes to @Artur5 for supplying the STL file for the two part scanning jig/ruler..

Actually I included those holes and rod merely as a travel stop, to avoid that the sensor goes beyond the edge of the paper. When that...

With the utmost gratitude I wish to thank The Hat for supplying me with not one but 2 scanning jigs/rulers for my Colormunki/i1Studio...

I have both the SC-P900 and the ET-8550. The ABW-mode with the P900 does give a better tonal gradient (using light colours for better...

Actually the scanning rail/jig is very useful when producing i1Studio/ccStudio Colormunki-based profiles (50 + 50 or 50 + 2x50) that...

Thanks yes I was aware of this. Mine came from a known source a retired pro friend of mine. He had been through similar with his first...

iPublish/i1Profiler can be downloaded, but most importantly if you attach the device there should be green check that there is licence...

Anybody here looking for a second hand Color Munki Photo ?. Look no further. That's an incredible bargain ..:p...

Asking myself if you will have that essential license for printer profiling for the i1Pro2....the license costs as much as a device...