pharmacist's latest activity

I have both the SC-P900 and the ET-8550. The ABW-mode with the P900 does give a better tonal gradient (using light colours for better...

Actually the scanning rail/jig is very useful when producing i1Studio/ccStudio Colormunki-based profiles (50 + 50 or 50 + 2x50) that...

Thanks yes I was aware of this. Mine came from a known source a retired pro friend of mine. He had been through similar with his first...

iPublish/i1Profiler can be downloaded, but most importantly if you attach the device there should be green check that there is licence...

Anybody here looking for a second hand Color Munki Photo ?. Look no further. That's an incredible bargain ..:p...

Asking myself if you will have that essential license for printer profiling for the i1Pro2....the license costs as much as a device...

It was only a tongue in cheek suggestion to ask if you were volunteering to remove the feet and scan directly on print surface. ;) :) I...

It’s not me that will need assembly instructions, I won’t be using it, I intend sending it to @pharmacist.. But as you say putting it...

I can do a test with the new slightly elevated jig (I am now using a paper/wood jig, so practically flat) and see if there is a...

The latest i1Studio and CCStudio versions generates patches with a white or black separation bar unlike the older versions of...

FWIW, and bearing in mind I have not tried a guide such as these. I believe the Z direction (height) can adversely readings due to...

Just PM me your address Nelson and I pop it in the post for you.. I just hope it works for you...;)

There is the first version in two parts. I joined them, using 2mm. steel rods and some glue.

This is the file....

Interesting! Curious if you already have some files / designs created, or just an idea in mind? Printing something that already exists...