Ink stained Fingers's latest activity
-
Ink stained Fingers replied to the thread Same target: scanned by both Colormunki and i1Pro2, differences in profile quality ?.The profiles are very much identical; what printer, paper and inks were used to print the patch sheet ? The black point is pretty much... -
Ink stained Fingers reacted to pharmacist's post in the thread Epson ET-8550 printing black and white with
Like.
I have both the SC-P900 and the ET-8550. The ABW-mode with the P900 does give a better tonal gradient (using light colours for better... -
Ink stained Fingers replied to the thread Swapping ET/L series inks to another inks - any special technique?.Thanks for your feedback, it does not really matter if the air bubble takes 40% or 50% or 60% , it just should not be filled up.
-
Ink stained Fingers replied to the thread Epson ET-8550 printing black and white.The SC-P700/900 run with pigment inks, the ET-8550 with dye inks, their look on paper may be different. All these printers support B/W...
-
Ink stained Fingers replied to the thread Swapping ET/L series inks to another inks - any special technique?.I don't see the need to clean the ink paths - the inks are colorwise very similar if not identical. I did ink swapping several times - I...
-
Ink stained Fingers reacted to Hogwild's post in the thread Epson WF-7110 printhead replacement with Like.
The Service manual can be found here: https://disk.yandex.com/d/8A4bI8ESvn6GM
-
Ink stained Fingers replied to the thread Epson WF-7110 printhead replacement.The best source for such action would be the service manual describing all actions necessary . You may need as well an adjustment...
-
Ink stained Fingers replied to the thread Colormunki Photo device and ccStudio.I'm not getting any further feedback from the 'made in China' company link; they don't take Paypal and I'm not registered on Alipay - so...
-
Ink stained Fingers replied to the thread Help. Brother j6940dw, LC402 cartridge INK TYPE, dye or pigment ?.You are right, that's exactly how a pigment ink looks like
-
Ink stained Fingers replied to the thread Colormunki Photo device and ccStudio.These lamps are quoted for 2.5 Volts, previous lamps with 3 V, and the overall power is unclear at this time. I opened an i1Pro longer...
-
Ink stained Fingers reacted to websnail's post in the thread Air in the ink supply of Ecotank printers with Like.
I would inject a small amount of air into the dampers so they're roughly 50-70%full of ink and then, holding the damper so the outlet is...
-
Ink stained Fingers replied to the thread Epson 106 vs. 114 ink fading performance.The fading performance should always be viewed for the combination ink + paper, you frequently find statements that pigment inks last...
-
Ink stained Fingers replied to the thread Bizarre ink 673 ink performance on L850 and L1800.Yes, I was running the L805 with pigment inks for a while, that was a mix of Chinese inks which I used as well on a 24" P7600. I...
-
Ink stained Fingers replied to the thread Colormunki Photo device and ccStudio.@The Hat - thanks for the link but those are more expensive than the Chinese ones; and I'm not clear yet about the electrical rating -...
-
Ink stained Fingers replied to the thread Epson Ecotank Cyan damper.I regret to say that I'm running out of options to fix your problem remotely, I would need the printer in front of me - e.g. I would...